Alsecure XGB Cca 3x35+1G16
Nexans ref.
10537621
GTIN 5413404305544
GTIN 5413404305544
Cca-s1,d2,a1
See all ALSECURE® XGB Cca 0,6/1kV / ALSECURE® XGB Cca 0,6/1kV EASY STRIPPABLE products
Description
ALSECURE XGB Cca is an installation cable for low voltage installations of 0.6/1kV with halogen-free outer sheath. ALSECURE XGB Cca is used in domestic and industrial fixed installations. ALSECURE XGB Cca can be used both indoors and outdoors, provided it is protected from direct sunlight. ALSECURE XGB Cca can also be placed underground in a well-draining tube. The cable is suitable for use at ambient temperatures between -15°C and + 60°C.
ALSECURE XGB Cca has fire reaction class Cca-s1,d2,a1 according to EN 50575 and may be installed in bundle or side by side and in areas with increased fire risk according to AREI/RGIE. The cable is also suited for areas where AREI/RGIE imposes s1 a1.
ALSECURE XGB Cca has fire reaction class Cca-s1,d2,a1 according to EN 50575 and may be installed in bundle or side by side and in areas with increased fire risk according to AREI/RGIE. The cable is also suited for areas where AREI/RGIE imposes s1 a1.
Standards
National : NBN HD 604 Part 5/Sect.LDeclaration of Performance : Reaction to fire: Cca-s1,d2,a1
according to EN50575:2014+A1:2016
Description
NEW: Easy Strippable
The following construction are provided with the Easy Strippable feature:
• sections 1.5 - 2.5 mm² with 2 to 7 conductors
• sections 4 - 6 - 10 mm² with 2 to 5 conductors
Design
- Copper core, solid (Class 1) or stranded (Class 2) depending on cross-section
- Cross-linked polyethylene (XLPE) insulation (X)
- Filling compound or tape halogen-free
- Outer sheath in halogen-free thermoplastic material (G) - Colour: GREEN
Installation
- In cable conduit
- In cable duct
- Embedded in concrete, cement or walls
- In open air protected from direct UV rays
- In industries
- In houses
- Underground installation is allowed provided the cable is installed in a sufficiently drained tube
- Operating temperatures down to -15°C are permitted, only if there are no mechanical forces nor movements
Characteristics
| Construction characteristics | |
|---|---|
| Conductor material | Copper |
| Conductor flexibility | Stranded class 2 |
| Conductor shape | Circular stranded (RM) |
| Insulation | XLPE (chemical) |
| Core identification | Brown, black, grey, green / yellow |
| With Green/Yellow core | Yes |
| Material of filler / inner sheath | Compound or tape |
| Outer sheath | Halogen free polyolefin |
| Sheath colour | Green |
| With smaller neutral conductor | No |
| Dimensional characteristics | |
| Number of cores | 4 |
| Conductor cross-section | 35mm² |
| Cross-section of the protection cores | 16mm² |
| Nominal outer diameter | 24.7mm |
| Approximate weight | 1504kg/km |
| Electrical characteristics | |
| Rated Voltage Uo/U | 0.6/1 kV |
| Permissible current rating in open air | 157A |
| Voltage drop, single phase | 1.11V/A.km |
| Test voltage | 4kV |
| Mechanical characteristics | |
| Impact resistance Max (IEC 30364-5-51) | 6J |
| Usage characteristics | |
| Field of application | Indoor, Outdoor |
| Bending factor when laying | 12(xD) |
| Minimum installation temperature | 0°C |
| Max. conductor temperature in service | 90°C |
| Operating temperature, range | -15 .. 60°C |
| Resistance to vibrations | Moderate |
| Chemical resistance | Medium |
| Water proof | Temporary |
| Packaging | Cut to length |
| Metric marking | Continuous |
